top of page

Industrial measuring, with GSM and LTE communication

Ares 12 LTE device from HW group

Ares 12 LTE is an industrial unit for remote monitoring and alarming over LTE for locations without LAN access. Includes battery backup. Connect up to 14 external sensors and 2 dry contact detectors.

Ares 12 LTE monitors the readings of connected sensors.

When a value reaches the alarm threshold, the device sends an e-mail or a text message (SMS), or dials specified numbers. Use a SensDesk Technology portal to view measured data in a complex dashboard. 

Ares 12 LTE includes an internal battery that provides back-up power for up to 24 hours.

Ares 12 LTE products support FOTA (Firmware Over The Air) for remote firmware updates.


  • 14x 1-Wire UNI/1-Wire Input; 2x Digital Input with S0 pulse counters; Data Logger for more than 250.000 recordss; Digital Inputs feature 32-bit pulse counters that retain their value even if the power fails

  • 5x E-mail; 5x "SMS+Ring"

  • Internal battery provides back-up power for up to 24 hours.

  • Use the USB interface to configure the device from a PC with no need to install any additional software. Remote configuration also possible via the “AresConf” tab in the SensDesk portal.

  • Remote firmware upload (FOTA) capability makes Ares devices ideal for large-scale deployments.

  • Connected via LTE and GSM/GPRS.List of APN available worldwide.

  • A sensor value out of a set safe range as well as a DI state change sends an alert by e-mail or "SMS+Ring", or activates a relay (via connected accessory "Relay Output 1-Wire UNI").

  • Data can be sent in e-mail attachments or downloaded via USB.

  • Compatible with a range of third party SW (SCADA etc.). Examples for programmers on using the product are available in the HWg-SDK (Borland C++, MS Visual, VB, C#, PHP, JAVA and more).

Ares 12 LTE: Features for IoT projects

  • Data transfer over the LTE/GSM / GPRS mobile network

  • Quick view of current data on SensDesk web portal

  • Mobile applications, desktop apps

  • Sending data by e-mail, custom SW or third-party cloud  applications

Ares 12 LTE units allow connecting to the Internet via an LTE/GSM/GPRS network. Data is transmitted via the HWg-Push protocol to the SensDesk public portal

The SensDesk IoT portal provides a quick view of current values on the mobile phone as well. It can display graphs of measured values up to 2 years back. It also includes the ability to set alarm messages via e-mail or SMS (with its own HWg-SMS-GW3 gateway) on a cloud-like web page.

Ares 12 LTE is ideal for outdoor or mobile IoT applications because it has wide signal coverage thanks to GSM and LTE communications. Switching between BTS (base station - network cell) is up to 180 km/h automatic and without loss of communication.

1 view0 comments


bottom of page