top of page
Hwg WLD sensing cable A

WLD sensing cable A

 

WLD sensing cable type A is a sensor for the detection of the presence of any conductive liquid. The liquid is detected along the entire length of the WLD sensing cable, which means that the extended area is monitored at once. The cable can be routed under the floors in datacentres or along the walls or wrapped around the pipes. Even the smallest volume of conductive liquid (water, ethylene glycol...) can trigger the alarm. The sensing cable is the essential component of the WLD system, the cable needs a WLD device or WLD relay to work properly.

 

WLD sensing cable is manufactured in lengths of

  • WLD sensing cable A - 2m
  • WLD sensing cable A - 10m
  • WLD sensing cable A - 50m

 

Custom length is available on request.

 

Sensing cable is part of HWg monitoring ecosystem (sensors + devices + SensDesk Technology portal), that gets you long-term reliable alerts, graphs, PDF reports, open API, remote device management, etc. The right Water Detection and early alert are essential in a lot of businesses, for example, data centers, etc. Water Leak Detection System from HW group is a complex solution developed to protect your facility against costly water damage that might threaten you.

 

No Bend limit

WLD sensing cable Type A is not limited by any bending radius. The sensing cable can be knotted and still works properly. Therefore the installation is easy and can be done without special training. WLD sensing cable can be also installed after other electrical cables because movements caused by the movement of the surrounding cables do not cause false alarms.

No Grip limit

Water detection functionality is not limited by point pressure within a reasonable range. The cable can be stepped on or pressed and will not send false alarms. It can also be routed under the door threshold.

 

No Twist limit

WLD sensing cable Type A can be twisted as any other electrical cable. 

 

 

Features: 
  • Water (or other conductive liquid) is detected along the entire length of the WLD sensing cable.
  • Early waring - even a few drops of liquid are detected
  • Long-term stable water leak detection system (no fake / false alarms)
  • WLD sensing cable can be easily combined with non-sensing prolong cable up to max total length. of 185 m (60 for NB-WLD)
  • WLD system can combine sensing and non-sensing segments of the cable to make it cost effective solution
  • WLD sensing cable is re-usable (flooded cable can be cleaned, dried & used again)
  • For use with WLD2, NB-WLD, SD-WLD and Sensor WLD Relay 1W-UNI
  • Easy & low-cost installation, Long-term reliability
  • WLD zone lenght limit (60 / 185m) is defined by used device with WLD zone input
  • Detection states: 0 = OK / 1 = Flooded / 2 = WLD cable disconnected
Applications and usage: 
  • Water Leak Detection in any environment
    • Datacenters
    • Storage room
    • Technology locations
    • Wooden constructions
    • Security systems
       
  • Can be taped on the floor, wrapped around pipes or attached to a wall

Hwg WLD sensing cable A

  • 600417 WLD sensing cable A - 2+2m
    600467 WLD sensing cable A - 2+10m
    600468 WLD sensing cable A - 2+50m
    600418 WLD sensing cable A - 2m
    600465 WLD sensing cable A - 10m
    600466 WLD sensing cable A - 50m
bottom of page