Flood detector 1W-UNI 3m: Spot detection

A simple water flood sensor (water level) detects electrically conductive fluid through 4 outlets on the detector body (spot detection). The sensor can be placed on a wall or floor with a dielectric surface.

Using an RJ11 cable, it connects directly to the 1W-UNI port (Poseidon, Ares, STE2, ..) where the sensor shows the values 1 (flooded) / 0 (non-flooded).

Features: 

• Water flood spot detection

• The sensor may be submerged below the fluid surface.

• The middle hole facilitates mounting on a wall.

• RJ11 sensor for STE2 / Ares / Poseidon2 LAN/GSM monitoring units.

Applications and usage: 

• Detection: Water flood sensor (spot detection)

• Interface: 1-Wire UNI (RJ11)

• Cable length: 3m

• Connects to: Poseidon2 (LAN monitoring), Ares (GSM monitoring)  

• Power supply: Powered from the 1-Wire UNI bus (RJ11)

• Environment: Indoor or outdoor use